X8 MIG WELDER
2.5 Troubleshooting
Time tracking
Digital work orders can be used to track lead times at work order level.
X8 MIG Welder automatically records the exact time when the work order is started, stopped, and
completed. With this information, WeldEye calculates for each work order the lead time (total time from start
to finish) and the active working time (lead time exclusive of pauses and breaks). These times are available
for reporting in the WeldEye cloud service.
2.5 Troubleshooting
Note:
The problems listed and the possible causes are not definitive, but suggest some typical situations
that may turn up during normal use of the welding system.
Table 6: Welding system
Problem
Recommended actions
The welding system does not power up
• Check that the mains cable is plugged in properly.
• Check that the mains switch of the power source is at the ON
position.
• Check that the mains power distribution is on.
• Check the mains fuse and/or the circuit breaker.
• Check that the interconnection cable between the power
source and the wire feeder is intact and properly attached.
• Check that the earth return cable is connected.
OPERATING MANUAL | EN
166
©
KEMPPI | 2018-09-28
