18 / 32 – K410068602012-00 / 11.2021 – ©
www.kemper-olpe.de
Do not use the product for other purposes than
described above.
Only use the KHS Timer-Set
- in sound condition
- as intended
Warranty
Warranty or liability are voided through:
- Disregard of installation instructions.
- Damage due to faulty installation.
- Unauthorised product modifications.
- Other incorrect operation.
Warning information
Please read and follow the warning information in
this instruction. Disregard of the warning informa-
tion may lead to injury or material damage!
Labelling of important warning information:
Danger!
Electricity!
Indicates hazards that might
result in severe or fatal injury.
Note!
Indicates hazards that
may lead to damages to the
system or malfunctions.
Important notes for the system operator
Maintenance
Annual inspection of the floater
switch is recommended.
EN
Installation and use
Read the manual carefully and follow the instruc-
tions before installation!
Provide manual to the plant operator and keep on
hand for further reference!
Warning!
Installation must be carried out by
qualified plumbers and electricians.
The prerequisite for operating the controller is the
deployment of professionally trained personnel
(see EN 50 110-1, in the ELT sector as well as
potable water installations in accordance with
TRWI DIN 1988).
Before commissioning, make sure the potable
water and electrical installation has been made
professionally:
- The connections were made properly and
professionally and
- The plant is properly protected.
Follow all applicable regulations (ELT, SAN...)
and the regulations from the local utilities.
Warning!
Priority must be given to the national
standards and provisions accident prevention.
Use
The KHS Timer-Set is used:
- for controlled isolation of water installations
and for time based water exchange to maintain
an intended use.
- for connection of 10 parallel operated valves
und one optional KHS Drain with overflow moni-
toiring (Fig. 688 00).
- in combination with Fig. 685 15 additionally
suitable as a terminal drain valve (also without
flow limiter) up to 5m/s.
Safety instructions
for installation
