EN
1502937-00
- 53 -
5
Filter unit
12
Connection cable
6
Connection for extraction
hose NW 45
13
Cable holder
7
Lower part with dust
collection container
14
Rear wheel
Tab. 13: Positions on the product
3.2
Intended use
The product is designed to extract welding fumes from electric welding at
their source and filter them out. In general, the product can be used for all
work processes in which welding fumes are released. However, it is
important to ensure that no "sparks" are drawn into the product from, e.g.
a grinding process.
Dimensions and further product details which must be observed can be
found in the technical data.
NOTE
NOTE
When welding alloyed or high-alloy steels with welding consumables of
more than 5% nickel-chrome, carcinogenic CMR substances
(carcinogenic, mutagenic, reprotoxic) are released. In accordance with
official regulations, only tested and approved products may be operated
in Germany for the extraction of these welding fume particles that are
hazardous to health using the so-called recirculation method.
Only products that meet the requirements of welding fume separation
class W3/IFA certified may be operated for the aforementioned welding
processes using the recirculation method.
When extracting welding fumes with carcinogenic components (e.g.
chromates, nickel oxides, etc.), the requirements of TRGS 560 (technical
rules for HAZMAT) and TRGS 528 (welding work) must be obeyed.
Содержание 63200
Страница 2: ...Typenschild einkleben ...
Страница 476: ......