Kemper 620 00, Инструкция по установке и эксплуатации

Страница: 31 / 72

© www.kemper-olpe.de – 11.2020 – K410062000000-00 – 31 / 72
Time-controlled water exchange in a drinking water system
1.2.2
The flush program facilitates automatic water exchange in drinking water lines that are
not used as intended. There are 16 adjustment facilities for flushing intervals. The facility
for connecting a drain with overflow monitoring makes it possible to automatically close
the KHS VAV valve during a backflow. At the same time, an optical and an acoustic warning
signal are issued by the leak control.
KHS Isolating valve PLUS
with spring-reset servo
drive
KHS drain with overflow
montior
Figure 688 00
KEMPER Leak control
Properties | Technical data | Materials
1.3.1
• Microprocessor-controlled device, specifically developed for leak monitoring
• Surface mounted housing 160x79x58 for wall installation with cable seal plugs
• Degree of protection IP54
• Internal consumption: 3 W
• Power supply: 230 V/1/N/PE/50Hz/max.3.15 A
• LCD display 1x16
• Control on device: via 3 key switches up, down, enter
• LED display: Ready for operation
• Ambient temperature range: 0°C - 50°C
• Humidity: 0-90% non-condensing
• Acoustic alarm (can be switched off)
• Reset function for alarm hold: Acknowledge on device
• Real-time clock with adjustable day and week programs, automatic switchover bet-
ween daylight savings - standard time
• Screwless cable terminals with operating lever
• Manual valve operation on device
• Relay protection valve switching capacity: max. 5A AC 1 / 230 V
• Relay flush valve switching capacity: max. 5A AC 1 / 230 V
• Floating alarm relay: max. 230 V, 2 A
• Max. series fuse: 16 A
Description of KEMPER Leak Protection Control
1.3
1
2
3
3
1
2