Operating instructions
2
Differential Pressure Measuring Kit
EN
1
General instructions
The KEMPER Differential Pressure Measuring Kit must only be used after reading this
operating instructions. This document contains information about the items,
installation, function and operation of the product. If any additional information is
required, please contact our Headquarter. You find the contact on the last page. Keep
this operating instructions always in the case of the KEMPER Differential Pressure
Measuring Kit.
Symbols
2
Area of application
for annual maintenance of the KEMPER Backflow Preventer figure 360 and 361,
according to DIN EN 806-5
to check the safety and function of the Backflow Preventer according to
DIN EN 12729
also suitable for the maintenance of all Safety Valves according to DIN EN 1717,
especially the Filling-Combination Valve figure 365
Planning target: Protection of drinking water, minimize risks
List of symbols
Note:
Highlights risks that may result in damage to
the plant or dysfunction.
Warning|Maintenance:
Highlights risks that may result in injury,
material damage or contamination of drinking
water.
