45
EN
KSB-100
CARE AND CLEANING
Disconnect the plug from the mains. Before cleaning the device, it should be
sufficiently cooled down after use. Do not pour out the liquid until it has cooled
down sufficiently to avoid scalding. Never immerse the device in water as it can be
damaged.
Clean the parts with a mild detergent and a little warm water. Before using the parts again, please dry
them su
ffi
ciently. Do not use abrasive sponges or abrasive cleaning agents or aggressive liquids such
as petrol or acetone to clean the device.
Clean the surface of the device with a soft cloth or sponge, a little warm water and a mild washing-up
liquid. Do not immerse the motor base in water.
1. Fill the container halfway with warm water and add a few drops of washing-up liquid or,
alternatively, 1 1⁄2 teaspoons of liquid bleach to the container.
2. Place the lid firmly on the container.
3. Place the container on the motor base and press the container down until the mixer starts. Let the
mixer run for about 30 seconds.
5. Remove the container from the motor base and rinse the container and lid thoroughly with clean
water. Dry o
ff
all parts.
EASY CLEANING AFTER MIXING
METHODS TO REMOVE DISCOLORATION IN THE MIXING CONTAINER
Fill the blender jug halfway with warm water and add three tablespoons of vinegar essence to the jar.
For an even better e
ff
ect, you can also add a teaspoon of baking soda. Let the mixture work for 2-3
hours. Then rinse well with water. You can fill the blender jug halfway with warm water and add baking
soda. Let the baking powder take e
ff
ect for about an hour, then rinse well with clean water.
Alternatively, you can fill the blender jug up to halfway with warm water and add two to three tablets
of denture cleaner. Let the denture cleaner work for about an hour, then rinse well with clear water.
You can achieve environmentally friendly cleaning with the juice of one lemon or citric acid and two to
three tablespoons of baking powder or baking soda. Fill the container halfway with warm water and
add the ingredients. Let the mixer run for about 10 seconds. Then pour out the container and clean
the inside walls with a non-scratching soft sponge. Then rinse the container thoroughly with water.
When exposed to direct sunlight for a few hours and a little lemon juice or citric acid, discoloration
usually disappears.
