Kemar KFS-900, Инструкция по эксплуатации

Страница: 34 / 44

3
Automatic
steam programs:
Adjusting the clock
1. Press the ‘PROG’ button for 2 sec in the standby mode, then the clock will flash
and you can adjust the clock.
2. Press the up ‘ ’ or down ‘ ’ buttons to adjust the clock, press the ‘PROG’ but -
ton again or wait for 10 seconds, the adjusting mode will be exited.
Instruction for use
1. Place the base unit (no. 10 water tank) on a stable surface, put the turbo ring
(no. 7) around the heating element (no. 9) with the largest side on the bottom.
The name on the Turbo Ring „Down“ must face down and „Up“ must be facing
upwards.
2. Pour the fresh water directly into the water tank (no. 10) up to the
maximum level.
3. Place the food in the basket.
4. Place the baskets no. 5 (1) then no. 4 (2) and finally no.3 (3) on the top of the
juice collector, and put the lid (no. 1) on.
5. Plug in and set the time for recommended cooking times, steam cooking
has begun .
6. Set on the display (12) and the controls (13), either the automatic cooking
programs, or select manually the recommended cooking time.
The device starts steaming.
7. Check the water level by looking the exterior water level indicator (no. 11),
if necessary, add water from the side of juice collector (no. 6) during steaming.
8. You can reheat the food, please take care if there is still enough water in the
water tank (no. 10).
9. When the steaming is finished, carefully open the lid and set the steam baskets
on a plate. Remove the steamed food.
Proceed very carefully, because they are very hot.
10. Switch of the device. Unplug the appliance, let it cool down completely
before cleaning.
Symbol on
the Display:
Suitable
for:
Default
Times:
Apple Fruits 5 min .
Carrots Vegetables 20 min.
Fish Seafood 25 min .
Rice White, brown, Natural - Rice 5 min .
Chicken Poultry / Meat 30 min.
Eggs Preparation of Eggs 5 min .