Searle Air Cooler
•
The fan guard should not be removed nor should the fanset be removed from the unit.
•
During installation and maintenance, ensure that:
•
The unit is installed and maintained by qualified personnel only.
•
When pressure testing is carried out, the pressure applied shall not exceed 1.3 times the maximum
operating pressure given on the nameplate of the unit.
•
The temperature of coils with vinyl-coated fins does not exceed 150°C (e.g. during brazing), as toxic fumes
would be produced.
Be aware of burn hazard:
2. WARRANTY PROCEDURE
This warranty applies to all units detailed in the price list and, unless otherwise stated in product literature or
specific contracts, provides for a manufacturer’s guarantee of twenty four months from date of dispatch against
faults in workmanship or materials.
When submitting a warranty claim the following information is required:
•
Customer’s original reference number job / order number.
•
Kelvion’s job number / advice note number.
•
Type of unit and serial number.
•
Date of installation.
•
Details of defect.
When providing details of the defect, please give as much information as possible, ie.
•
Was the unit satisfactory on delivery?
•
Frequency of fault (continuous / intermittent)
•
Is the unit leaking ? (+ location of leak)
Items manufactured by Kelvion:
No work should be undertaken to resolve the problem either by the customer or a 3rd party until approved by
Kelvion – failure to do so could invalidate the warranty.
The item may be replaced or rectified if the guarantee claim is valid.
For items that have been installed, Kelvion have the right to decide if rectification on site is suitable and who
should undertake the work or whether to return / replace the unit(s). For items where Kelvion decides to
replace, the original faulty item must be returned. All items which are returned will be inspected.
If the guarantee claim is not valid the customer will be advised and further instructions requested, either to
return the item or to issue an official order to replace or rectify the item.
If you require a replacement product the buyer will be asked to supply a purchase order, when the unit has been
returned and evaluated, the buyer will be notified by Kelvion if the claim is valid.
Items NOT manufactured by Kelvion:
•
The item will be replaced and the customer will be invoiced
•
The item will be returned to the supplier for evaluation.
•
If the claim is valid the credit received from the supplier will be passed on to the customer.
Burn hazards
1.
Burn hazards from pipes and pipeline components when the heat exchanger temperature
exceeds 60°C.
2. Burn caused by refrigerant coming into contact with the skin or eyes.
