Kelvinator KSV80HRC Скачать руководство пользователя страница 3

caution

1   The unit must only be installed by a qualified refrigeration 

mechanic and electrical work carried out by a qualified 
electrician according to local or government regulations 
and in compliance with this manual.

2   If the supply cord is damaged, it must be replaced by 

the manufacturer, its service agent or similarly qualified 
persons in order to avoid a hazard.

4   The appliance must be positioned so that the plug 

is accessible.

5   The temperature of refrigerant circuit will be high, 

please keep the interconnection cable away from the 
copper tube.

6    This appliance is not intended for use by persons 

(including children) with reduced physical, sensory 
or mental capabilities, or lack of experience and 
knowledge, unless they have been given supervision or 
instruction concerning use of the appliance by a person 
responsible for their safety.

 

 Children should be supervised to ensure that they do not 
play with the appliance.

warning

Before obtaining access to terminals, all supply circuits must 
be disconnected.

Please read this installation manual and the user manual 
before installation and store in a handy place for later 
reference. Inside you will find many helpful hints on how to 
install and test the air conditioner properly. 
Electrical work must be carried out by a licensed electrician. 
Be sure to use the correct rating of the power plug and main 
circuit for the model to be installed.
Incorrect installation due to ignoring this instruction will 
cause harm or damage, and the seriousness is classified by 
the following indications.
Meanings of symbols used in this manual are shown below:

warning

This symbol indicates information concerning your  
personal safety

caution

This symbol indicates information on how to avoid 
damaging the appliance

tips and information

This symbol indicates tips and information about  
use of the appliance

environmental tip 

This symbol indicates tips and information about 
economical and ecological use of the appliance

 

This symbol indicates never to do this

 

This symbol indicates always do this

Important safety instructions

Notice for installation

Kelvinator Air Conditioning 

 Important safety instructions/Notes for installation  3

Содержание KSV80HRC













Отзывы: