Kelvinator 2SF-13, Руководство по обслуживанию и установке

Страница: 35 / 40

8FR – PARTS & MOUNTING 33
8FR Accessories
DESCRIPTION PART NO.
Dipperwell Accessory 7300000
Stainless Steel Syrup Rail Kit 76-3745
S.S. Housing Cap Ass’y 76-3733P
Short Jar 33-0448
Pump Syrup 33-0449
Chocolate Pump 33-0450
Lid with Ladle 33-0544-01
Hinged Lid 33-0544
Cover with Ladle Attached 33-0545
Divider & Jar 33-0452
ACCESSORY MOUNTING
NOTE: There are provisions for either righthand or left
hand dipperwell position.
TO INSTALL DIPPER WELL:
1. Remove (2) 1/4 - 20 x 1/2 machine screws securing
the mounting plate to the cabinet. (Save the screws.)
If the dipper well is mounted on the opposite end,
remove the two plug buttons covering the mounting
holes. (Save the plug buttons.)
2. Mounting plate (supplied with the cabinet) must be
under the flange of the stainless steel cap.
3. Slide the flange of the dipper well under the mounting
place and line up the holes in the dipper well and
mounting plate to the holes provided in the cabinet.
4. Secure the dipper well and mounting plate to the cab-
inet with (2) 1/4 - 20 x 1/2 machine screws which were
removed in instruction #1.
5. Replace plug buttons (removed in instruction #1) in
the holes not being used.
CLEANING PROCEDURES FOR
CHOCOLATE & SYRUP PUMPS
In order to keep pumps in good working condition, all
pumps should be cleaned daily.
When the pumps are cleaned, it will be necessary to
remove the pump cups from the pumps. This can be
done by pushing up on the cup and turning. Before the
cup is removed, set the pump in a large container of
warm water and mild detergent, the pump several times
until flushed clean. After the pumping operation, remove
the cup and let it soak in the cleaning solution until all
syrups or chocolate have been removed. Once clean,
replace the pump cup on the pump. Final flushing
should be done with hot water only. The assembly is
now ready for the next day's operation.
It is recommended that you do not put pump parts in the
dishwasher.