Kelvinator 2SF-13, Руководство по обслуживанию и установке

Страница: 17 / 40

Condensate Heater
TO REPLACE HEATER WIRE
1. Unhook the bottom edge of the chamber guard and
remove.
2. Pull out screw nails and lift out chamber guard
retainer.
3. Unplug and pull out original heater, carefully checking
for any damaged areas. Carefully check recess for
heater where damaged heater wire was installed.
4. Plug in one end of the replacement heater (see FIG-
URE 14),and carefully insert heater in recess aroud
top opening. Tuck any excess lenght in space jprovid-
ed after plugging in the opposite end of the heater
wire. Reconnect the heater wiring. Replace in slots
provided and reseal cavity with clear silicone.
5. Check that heater operates before replacing retainer
and chamber guard.
GENERAL MAINTENANCE & REPAIR 15