Kelvin Mini Series, Инструкция по техническому обслуживанию

Страница: 20 / 29

17
ʤ 8 ʥ Equalizing charge method
a. Normally charge first
b. Stop 1 hours when full charge, then charge 1 hour with 0.05C
5
(C
5
means battery rated capacity)
Repeat b with times until battery has fierce bubble when switch off
ʤ
9
ʥ
When not using a period of time, you must charge fully
ʤ
10
ʥ
The battery should avoid direct sunlight, keep at least 2M distance from heat source
ʤ
11
ʥ
Avoid contact with any liquids and hazardous substances, any metal impurities cannot fall into the battery.
4 ɿ Motor maintenance
ʤ
1
ʥ
Check motor at the fixed period
ʤ
2
ʥ
Use 250V ohmmeter to measure the cold insulation resistance of the motor, the resistance should more than
0.5MΩ, if less than 0.5 MΩ, should do hot dry processing
ʤ 3 ʥ Check whether motor outgoing connecting wire is correct and firm
ʤ
4
ʥ
Check whether commutator segment is clean, whether electric brush can slide freely in the brush box
ʤ
5
ʥ
Check whether all fasteners are tight
ʤ 6 ʥ Check electric brush worn situation every 3 months and whether replace brush
ʤ
7
ʥ
Do a full maintenance of the motor each year
5. Electromagnetic brake maintenance
1) Use for a long time in a high humidity environment, should avoid rusting, clean rust if have
2) Do not touch friction surface with hand, no oil pollution, otherwise can't reach the maximum torque, please clean
and wipe friction surface
3) When using temperature is high, please install it in ventilated place, applicable ambient temperature is -
10
Ԩ
~40
Ԩ
4) The initial torque value is low, after some using time, torque value will be stable
5) Please check regularly for all parts