Kelly KLS8080I/IPS Sinusoidal Brushless Motor Controller User’s Manual
V 1.10
25
Pin7/Pin6.Please try to open the user program in your computer or other devices.Then you may
try to click Read button in user program or App.You will see the first picture of user program.
Please check whether the Identification Angle item is at 85 or not.It is correct if identification
angle item is at 85.
5,Please fill 170 in the identification angle item.And please click the write button.The user
program will give a pop-up window which show the Write operation is successful.Please quit
from the user program.Please turn off the power supply.
6,Please turn on the power supply after the power supply is off for a few seconds.The beeper
will send a constant beep after the power supply is turned on.The motor shaft will try to run on
directions randomly.It is normal because the controller is doing Identification angle operation.
7,Please wait about 2-3 minutes.
8,If the identification angle operation is finished,the constant beep sound will be
disappeared.The beeper will beep an error code 3-2.And you will see reset error message in
the monitor screen of user program.You can see the error message in monitor screen of user
program for KLS-8080I controller also.
9,Please turn off the power supply again.Please wait about a few seconds to turn on the power
supply one more time.
10,Please try to connect the controller to user program again.You will see 85 in the identification
