Kelly CL1, Руководство по эксплуатации

Страница: 39 / 46

39
Trouble shooting
Symptom Problem Solution
Chain not rotating Bearing failure in swivel unit Refer to daily checks on page 37
Front chain swivels on
machine too low
Foreign material fouling
bearings
Refer to page 26 or 32
Uneven tread wear on
transport wheels Tyre pressure too low
Excessive road speed
Inflate to correct pressure refer to
table on page 41
Always travel at a safe speed.
NEVER EXCEED 25kph.
Chains not locating
properly on chain catcher Chain catcher not correctly
precision Adjust chain catcher precision until
chain locates correctly
Operation leaves central ridge
behind machine Front chain swivels are too low Refer to chain mount arm height
adjustment on page 32
Operation leaves central
furrow behind machine Rear chain swivels are too low Refer to chain mount arm height
adjustment on page 32
Ridging on outside edge of
machine Leading end of
corresponding rear chain is too
low Refer to drop leg height adjustment
on page 32 and 33
Furrow on outside edge Rear of front chain set too low Refer to drop leg height adjustment
on page 32 and 33
Chain not tensioning properly Tension cylinder at maximum
stroke Refer to page 28
Never attempt to fold for transport if the chain is clogged with weeds or
mud as the extra weight may damage hydraulics or frame