3
Safety Guide
Compressor Safety Precautions:
1.
Read and understand all instructions completely before operating this compressor.
2.
Disengage power to mains and disconnect power lines to the machine prior to
performing any work or maintenance on this unit.
3.
Open tank discharge valve and relieve all pressure from tank and compressor
lines. Do not attempt to remove any pressurized systems without first relieving
the pressure within the unit.
4.
Do not attempt to service any part while the machine is in operation.
5.
Do not operate the compressor at pressures in excess of its indicated rating on the
compressor nameplate.
6.
Do not operate the compressor at speeds in excess of its indicated rating on the
compressor nameplate.
7.
Do not remove any guards, shields, or screens while the compressor is operating.
If removed for maintenance, replace before resuming operation.
8.
Observe the delivery pressure gauge daily to be sure the automatic control system
is operating within the proper limits.
9.
Periodically check all safety and relief devices for proper operation.
10.
Do not play with compressed air. Pressurized air can cause serious injury or death
to personnel.
11.
Be sure that no tools, rags, or loose parts are left on the compressor or drive parts.
12.
Do not use flammable solvents for cleaning parts.
13.
Exercise cleanliness during maintenance when making repairs.
a.
Keep dirt away from parts and exposed openings by covering with a clean
cloth.
14.
Install pressure relief valves in any isolated piping in the plant system.
15.
Do not operate the compressor in areas where there is the possibility of ingesting
flammable or toxic gases.
16.
Check pipe for any signs of wear or deterioration before each use and make
certain that all connections are secure.
17.
Observe the prescribed maintenance intervals.
18.
Only use genuine Kellogg parts, operating oils and operating material
recommended by Kellogg.
19.
Strictly observe the effluent disposal laws of your local authority when disposing
of condensate.