23 & 24
. Note: Gang bars deleted for clarity.
25
. Place the rear gang bar assembly under the rear of disc with blades facing in the direction
illustrated.
26
. Use a single strap or chain of sufficient strength wrapped around the gang bar at its center point
of balance to lift the bar up to the frame. This may require fork extensions or a boomlift. Once a
single bolt and nut is installed (do not tighten), the gang bar assembly may be lowered and the chain
repositioned to ease installation of the remaining bolts. A pinch bar will make this task easier. Install
the bolts as per illustrations 27 and 28 on page 31.
30
