Kellfri 35-VKMATV120H Скачать руководство пользователя

Страница: 32 / 32

In accordance with 2006/42/EC, Appendix 2A
Kellfri AB
Munkatorpsgatan 6
SE-532 37 Skara, Sweden

Hereby declares that the machine
Name: 35-VKMATV120H, 35-VKMATV150H, 35-VKMATV150H2
Type: Flail mower for ATV with flap

Conforms with all applicable requirements in the Machinery Directive 2006/42/EC.
Other equipment must comply with the Machinery Directive's requirements.

WARRANTY TERMS AND CONDITIONS

The warranty's validity

- Kellfri's warranty is valid for 12 months from the date of purchase

The warranty covers

- Reimbursement for parts replaced after a material fault or

manufacturing fault has been verified.

The warranty does

not cover

-  Labour costs
-   Travel  costs
-  Machines on which the purchaser has made or commissioned

modifications.

- Any additional costs arising as a result of damage to the machine.
- Damage due to normal wear and tear of the machine, substandard

servicing, the user's inexperience or use of spare parts that are
not original.

- Wear parts such as hoses, seals, oil and belts.

Kellfri AB

Tel.: +46 511 242 50

Email: [email protected]

You are always welcome to give feedback or ask us about our equipment and products.

Kellfri AB has a policy of continuous product development and therefore reserves the right

to make modifications, e.g. to the design and appearance of the product, without prior notice.

CUSTOMER SERVICE

EC DECLARATION OF CONFORMITY FOR MACHINERY, ORIGINAL

Latest change 19 December 2019

Kjell Johansson

Product Development Manager

Содержание 35-VKMATV120H

































Результаты поиска

Содержание 35-VKMATV120H

Отзывы:

Похожие инструкции для 35-VKMATV120H

Бренды по названию

Популярные бренды

Kellfri 35-VKMATV120H, Руководство по эксплуатации

Результаты поиска

Содержание 35-VKMATV120H

Отзывы:

Похожие инструкции для 35-VKMATV120H

Бренды по названию

Популярные бренды