Kellfri 27-SF20, Инструкция по эксплуатации

Страница: 10 / 32

10
GRIP BAR
SAFETY PRESENCE GRIP BAR
The bar must be held against the handle for the engine to run. If
you release the grip, the ignition system short-circuits and the en-
gine stops.
Engage cutter wheel
Disengage cutter
wheel - START position
THROTTLE
The lever controls engine speed. With the lever down, the
engine runs at idle and functions as start position. When the
engine speed increases, the centrifugal clutch drive automati-
cally engages the cutting wheel.
WARNING!
NEVER operate a machine with a defective brake
GRIP BAR
Brake
The lever activates a disk brake on the left wheel when it is pulled
backwards. The brake should always be activated when operating
the grinder. When it is parked and when it is being transported.
Warning!
DO NOT BIND THE BAR TO THE HANDLE.
IT IS THERE FOR YOUR SAFETY.
Warning!
The product must not in any circumstances be
modified without permission from the manufac-
turer. Unauthorized modification of the machine
and/or accessories can cause fatal injuries or death
to operator or others.