Kellfri 26-LW20, Руководство пользователя

Страница: 15 / 32

15
Table of contents
AFTER USE
Do not park with a suspended load but with the equipment resting on the ground.
Wash down the equipment with water if necessary.
TRANSPORTATION AND STORAGE
Check that the work area is free from bystanders, children and objects before driving off.
Always observe additional caution during transport and moving. Ensure that the equipment or
product is well anchored and existing transport lashings are fitted. Always position the load as low
as possible. Respect the risk zone even during transport and moving. Do not permit anyone to walk
under suspended loads when carrying out lifts. Trailers used for transport should have brakes that
work. Always store the equipment or product on a dry surface, preferably under a roof, when not in
use. Ensure that the equipment or product is stable and cannot tip over. Never permit children to
play at the storage site. Be aware of the tipping risk!
TRANSPORTATION
• Before transportation, make sure that the boom and swing arms are locked to prevent
uncontrolled movement. Raise the boom and bucket to transport mode. Fit the transport
locking devices. Raise the stabilisers.
• Drive slowly on uneven terrain, do not drive too close to sloping terrain and potholes.
• Check the tyre pressure on the tractor, see information on the tyre walls. Do not exceed the
maximum pressure!
STORAGE
Before storing, make sure that the machine is clean, wash away all dirt from the excavator.
Lubricate visible cylinder rods. Lubricate all joints, make sure that the hydraulic system is sealed
against contaminants. Store the machine on a dry surface, preferably under a roof, when not in use.
BEFORE NEXT USE
• Clean the machine, it makes it easier to detect damage.
• Check all hydraulic hoses and couplings before connecting the unit to the power take-off.
Check for leaks after switching on.
• Check that joints are sufficiently lubricated for smoother work.
• Check and tighten bolts if necessary.
• Check the tyre pressure on the tractor, see information on the tyre walls. Do not exceed
the maximum pressure!
MAINTENANCE AND SERVICE
The tractor's engine must be turned off and the equipment lowered to the ground before starting
any servicing work. Make sure that the equipment is stable and cannot tip over when carrying
out maintenance and service work. When performing maintenance on the machine, use suitable
support/holder as assistance. Replace damaged or worn parts immediately to reduce the risk of
injuries. Carry out maintenance, service and checks in line with recommendations. Only use spare
parts with equal performance to reduce the risk of injuries and breakdowns. All electrical repairs
and electrical connections must be carried out by a qualified person. Always follow the safety
instructions for maintenance according to the schedule. This is particularly important for blades
and safety equipment, in consideration of the danger it would entail if they were to come loose
while working.
• Regularly check the condition of the equipment to prevent breakdowns. If cracks, twists,
bends, gaps or fatigue are discovered, stop using the equipment and rectify the fault. Worn
parts must be replaced.
• Retighten all nuts and bolts after a few hours of operation and at the end of a day's work.
• Disconnect the equipment from the towing vehicle while faults are being repaired.