12
Setting Conveyor
The selected bolts are tightened to ten-
sion the belt. To adjust the tension of
the conveyor belt tighten and/or re-
lease bolts. If the belt tends to pull to the
left, the left bolt should be tightened.
Tensioning the chain
Release the two bolts holding the protec-
tive guard and the chainsaw bar. Tension
the chain by tightening the index bolt,
then tighten the two bolts holding the
protective guard and the chainsaw bar.
The chain is tensioned correctly when it
can be pulled upwards a few millimeters.
1. Losen the bolts
REPLACING CHAINSAW/CHAINSAW BAR
2. Unhook the chainsaw
bar and remove the
chainsaw
3.Install a new chainsaw
bar / chain, then fit the
bolts. Do not tighten the
bolts completely until
the chain is properly ten-
sioned
