Keller HTP1, Руководство по эксплуатации

Страница: 5 / 19

25
1.1 Intended use
The HTP1 hand pump can only be used for generating pressure in low-volume
measuring devices. The device is only designed for use with hydraulic oil or deminera-
lized water, other media will result in damage to the hand pump.
The hand pump may not be attached to external pressure sources.
WARNING! No safety component!
The hand pump of the series HTP1 is not safety component in accordance with Direc-
tive 2006-42-EC (Machine Directive).
â
Never use the HTP1 as a safety component.
The operational safety of the device supplied is only guaranteed by intended use. Do
NOT exceed the specified limits (
➝
paragraph 9: “Technical data”) .
CAUTION! Risk of injury or material damage!
By connecting the HTP1, the measuring device is hydraulically connected to the
hand pump. If the pressure relief valve is opened, a compressed medium can flow
through the pressure hose into the hand pump’s storage container. At sufficiently large
volumes, the reservoir may overflow.
â
Never connect the HTP1 directly to the hydraulic system with large volumes
(construction machines, etc.) or an aggressive medium (such as brake fluid).
Before ordering and installation, check that the hand pump is suitable for your appli-
cations.
1.2 Exclusion of liability
We accept no liability for any damage or malfunctions resulting from incorrect in-
stallation, in-appropriate use of the device or failure to follow the instructions in this
operating manual.
1 Device description