Keller CellaTemp PKF 66, Быстрое руководство

Страница: 3 / 8

EN
Quick Start Guide CellaTemp PK (L) 6x, PKF 66 / 67
General
This guide gives you the minimum information to properly install the pyrometers of the PK se-
ries. For detailed information please refer to the user guide CellaTemp PK. You can download
it under the following link:
https://www.keller.de/en/its/mediacenter/manuals.htm
Explanation of symbols
Important safety-related references in this manual are marked with a symbol.
ATTENTION This symbol points out guidelines. If you do not observe them, the device
might be damaged, malfunctioning or even fail to operate.
CAUTION: This symbol points out hints and information which should be heeded for effi-
cient and trouble-free operation.
► Action: This symbol instructs the operator to take action.
> Reaction, Result: This symbol indicates the result of the action taken.
Laser safety instructions for the laserpointer
Class 2 Laser Product
• Never look directly into the laser beam path (emitted power <1.0 mW at a wavelength of
630-670 nm)
• Do not leave the instrument unattended when the laser is activated.
• Do not point the laser beam at any person.
• During pyrometer installation and alignment, make sure to avoid the possibility of laser light
reflections caused by reflective surfaces.
• All currently valid laser safety standards must be observed.
• Do not dismantle the laserpointer.
Note the laser warning label on the laserpointer.
The black and yellow laser warning label is affixed on the laserpointer.
Fitting
• The two-colour pyrometer should be mounted, where it is not unnecessarily exposed to smoke,
heat or steam. Contamination of the lens leads to a lower display of the measuring value.
Therefore make sure, that the lens is always clean. The field of view of the two-colour pyrome-
ter must remain free. Any interference by objects can cause measurement errors.
Pyrometer
CellaTemp PK(L) 6x, PKF 66 / 67
Quick start guide