Keithley System SourceMeter 2601B, Быстрый старт, Страница: 15 / 18

Step 3: Set measurement function and range
1. Press the MEAS key as many times as needed to select the V
(voltage) measurement function. In the following figure, the
measurement function has been set to “V.”
2. Press the AUTO key as many times as needed to select
the AUTO range function. When AUTO is selected, the Series
2600B automatically selects the best range for the measured
value. You will briefly see the display shown below, and then the
main display screen reappears.
Step 4: Turn the output on
Turn the output on by pressing the OUTPUT ON/OFF control
(for Model 2602B and 2604B) or (Model 2601B). The
ON/OFF indicator LED lights and measurements begin.
Step 5: Observe measurements
Observe the measured voltage on the main area of front panel
display. The readings should be very close to the 20 V source value.