Keithley SourceMeter 2470, Руководство пользователя

Страница: 35 / 86

Model 2470 High Voltage SourceMeter Instrument User's Manual Section 3: Using a remote interface
2470-900-01 Rev. A /
May
2019 3-11
9. In the Virtual Instrument Name box, enter a name that you want to use to refer to the instrument.
10. Select Finish .
11. Select Cancel to close the Wizard.
12. Save the configuration. From the Keithley Configuration Panel, select File > Save .
Verify the instrument through the Keithley Communicator:
1. Click Start > Keithley Instruments > Keithley Communicator .
2. Select File > Open Instrument to open the instrument you just named.
Figure 17: Keithley Communicator Open an Instrument
3. Click OK .
4. Send a command to the instrument and see if it responds.
If you have a full version of NI-VISA on your system, you can run NI-MAX or the VISA Interactive
Control utility. See the National Instruments documentation for information.