![background image](http://html2.mh-extra.com/html/keithley/series-2200/series-2200_specification-and-performance-verification-technical-reference_3968597019.webp)
Speci
fi
cations
Table 7: Common characteristics (cont.)
Item
Description
Isolation Voltage, Output to
Chassis
Any output can be
fl
oated up to 240 V (DC + peak AC with AC limited to a maximum 3 V
pk-pk
and
maximum of 60 Hz) relative to the Earth Ground terminal. Note that remote sense terminals
should remain within 1 V of their respective outputs to avoid possible damage.
Isolation Voltage, Output to Output
Any output can be
fl
oated up to 240 V (DC + pk AC with AC limited to a maximum of 3 V
pk-pk
and a maximum of 60 Hz) relative to any other output terminal. Remote sense terminals should
remain within 1 V of their respective outputs to avoid possible damage.
Table 8: Terminal strip
Item
Description
The rear panel has a customer accessible terminal strip. This strip is comprised of a board-mounted section and a
technician-removeable section. The technician-removeable section offers the customer a safe set of screw terminals to connect
to various instrument functions detailed below.
Table 9: Interfaces and output ports
Parameter
All models
USB device,
nominal
USB 2.0 Full Speed device. 12 Mb/sec maximum.
Command
processing time,
typical
About 400 ms per command.
Series 2200 Multichannel Programmable DC Power Supplies Technical Reference
9