Keithley KUSB-3160 Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 59

Keithley KUSB-3160 Скачать руководство пользователя страница 30

Chapter 3

18

Connecting to a Self-Powered USB Hub

Self-powered USB hubs are USB hubs that are powered by their own
external power supply. You can connect multiple USB hubs to a USB
port on the host computer. Each of these hubs supports multiple
KUSB-3160 modules.

Note:

Belken hubs are known to work properly with the

KUSB-3160 modules.

To connect a KUSB-3160 module to a self-powered USB hub, perform
the following steps:

1.

Attach one end of the USB cable to the KUSB-3160 module and
the other end of the USB cable to a self-powered USB hub.

2.

Connect the power supply for the self-powered USB hub to an
external power supply.

3.

Connect the hub to the USB port on the host computer using
another USB cable.

The operating system automatically detects the USB device.

4.

If you previously installed the device driver, ignore the
remaining steps, and repeat steps 1 to 3 until you have attached
the number of hubs (up to five) and modules (up to four per hub)
that you desire.

If you have not installed the device driver, the New Hardware
Found wizard appears. Click

Next

to have the wizard search for

the device driver. Proceed to step 5.

5.

Click the option to search for the driver, then click

Next

.

6.

Click the option to specify the location, browse to the location on
the CD that contains the driver files, then click

Next

.

7.

Click

Next

.

«
...
28
29
30
31
32
...
»

Содержание KUSB-3160




























































Отзывы:

Нет отзывов