5-16
Troubleshooting
KPCI-PIO24 User’s Manual
2. Turn OFF the host computer.
3. Insert the test connector or cable assembly/terminal accessory into the board connector.
4. Turn ON the host computer and boot Windows 95, 98 or NT.
5. Click the Windows Start tab.
6. Start the PIO Control Panel as follows:
a. In
the
Start menu, click Programs.
b. Find
the DriverLINX
➧
Test Panels folder, under which you should find the PIO
Panel entry.
c. Click on the PIO Panel entry.
The
PIO Control Panel should appear. See the example in Figure 5-9.
Figure 5-9
PIO Control Panel example
NOTE
In the following steps 7 through 10, graphical slide switches on the
PIO Control Panel are used for all settings. Each click on the button
of a slide switch toggles the button up or down.
7. Using the ‘Configure’ switches on the PIO Control Panel, configure ports A, B, and C for
output as shown in Figure 5-10.
Содержание KPCI-PIO24
