manualshive.com logo in svg

Keithley 7711, Руководство пользователя

Поделиться
Скачать
Keithley 7711 Скачать руководство пользователя страница 18

14

SYSTem subsystem

Commands to perform system operations are listed in 

Table 6

. Details on these commands follow the table.

NOTE

The following commands for the Model 7711/7712 SYSTem subsystem are included here for 
reference.

:CARD1

Model 2700/2701 commands

:CARD2

If no card is in slot 1, then all commands in 

Table 6

 generate a -241 “hardware missing” 

error. 

If the card does not support the 

feature or channels being queried, then 0 will be returned.

:MUX?

Returns either a 1 or 0. (For a Model 7711/7712 card, a 0 is returned.)

:SNOpen?

"single, no-open" type — 

The card is organized into banks of channels, and one channel must always be closed within that 

bank. The Model 7711 is representative of this class with two banks of 4 channels each. Returns either a 1 or 0. 
(For a 7711/7712 card, a 1 is returned.)

Table 6 

SYSTem subsystem commands

Command

Description

Default

2700/2701 Commands

:SYSTem

:CARD1

Path to queries for slot 1 card. 

:CARD2

Path to queries for slot 2 card.

:SNUMber?

Request serial number of card in Slot x.

:SWRevision?

Request firmware revision of card in Slot x.

:VMAX?

Query the highest allowed voltage on this card.

:MUX?

Return TRUE if this card support ANY mux channels.

:SNOpen?

Query whether the card is of the "single, no-open" type.

:BANKs?

This query returns the number of banks on the card. If the card is not of the 

Single, No-Open type, then a -221 "Settings Conflict" error results with 
this query.

2750 Commands (only)

:CARD

Path to queries (slot is designated by <NRf> after query command).

:SNUMber? <NRf>

Request serial number of card in Slot x.

:SWRevision? <NRf>

Request firmware revision of card in Slot x.

:VMAX? <NRf>

Query the highest allowed voltage on this card.

:MUX? <NRf>

Return TRUE if this card support ANY mux channels. 

:SNOpen? <NRf>

Query whether the card is of the "single, no-open" type.

:BANKs? <NRf>

This query returns the number of banks on the card. If the card is not of the 

Single, No-Open type, then a -221 "Settings Conflict" error results with 
this query.

Содержание 7711







































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды