Keithley 7012-C Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 93

Keithley 7012-C Скачать руководство пользователя страница 44

Card Connections & Installation

3-17

Matrix card installation

Perform the following steps to install the matrix card
assembly in the Model 7001 mainframe:

WARNING

Turn off power from all instrumenta-
tion (including the Model 7001 main-
frame) and disconnect their line
cords. Make sure all power is re-
moved and stored energy in external
circuitry is discharged.

1. Mate the connector card to the relay card if they are

separated. Install the supplied 4-40 screw at the
end of the card to secure the assembly. Make sure
to handle the cards by the edges and shields to pre-
vent contamination.

2. Facing the rear panel of the Model 7001, select the

slot (CARD 1 or CARD 2) that you wish to install
the card in.

3. Referring to Figure 3-15 for Model 7012-S installa-

tion, or Figure 3-16 for Model 7012-C installation,
feed the matrix card assembly into the desired slot
such that the edges of the relay card ride in the
rails.

4. With the ejector arms in the unlocked position,

push the card assembly all the way into the main-
frame until the arms engage into the ejector cups.
Then push both arms inward to lock the card into
the mainframe.

5. For the 7012-C, also install the screw shown in Fig-

ure 3-16.

Matrix card removal

To remove the matrix card assembly, Þrst unlock it by
pulling the latches outward, then pull the card assem-
bly out of the mainframe. Remember to handle the card
assembly by the edges and shields to avoid contamina-
tion that could degrade performance.

Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com

«
...
42
43
44
45
46
...
»

Содержание 7012-C






























































































Отзывы:

Нет отзывов