1-2
Getting Started
General information
Warranty information
Warranty information is located at the front of this manual. Should your Model 6430 require
warranty service, contact the Keithley representative or authorized repair facility in your area
for further information. When returning the instrument for repair, be sure to fill out and include
the service form at the back of this manual to provide the repair facility with the necessary
information.
Contact information
Worldwide phone numbers are listed at the front of this manual. If you have any questions,
please contact your local Keithley representative or call one of our Application Engineers at
1-800-348-3735 (U.S. and Canada only).
Manual addenda
Any improvements or changes concerning the instrument or manual will be explained in an
addendum included with the manual. Be sure to note these changes and incorporate them into
the manual.
Safety symbols and terms
The following symbols and terms may be found on the instrument or used in this manual.
The
symbol on an instrument indicates that the user should refer to the operating
instructions located in the manual.
The
symbol on the instrument shows that high voltage may be present on the termi-
nal(s). Use standard safety precautions to avoid personal contact with these voltages.
The
WARNING
heading used in this manual explains dangers that might result in personal
injury or death. Always read the associated information very carefully before performing the
indicated procedure.
The
CAUTION
heading used in this manual explains hazards that could damage the instru-
ment. Such damage may invalidate the warranty.
!
Содержание 6430
