Section 3: Using the web interface
Series 3700A System Switch/Multimeter User's Manual
5. Click "11102" to close that channel and open all other channels.
Figure 21: 3700A web interface exclusive close
Set up channel patterns from the web interface
You can use channel patterns as a convenient way to refer to a group of switching channels with a
single alphanumeric name. When you perform close or open operations on a channel pattern, only
the channels that are in the channel pattern are affected.
There is no speed advantage in performing close and open operations on channel patterns compared
to performing the same operations on individual channels or a list of channels.
Exercise: Create channel pattern "Test1Pattern" using the Snapshot feature
To create a channel pattern "Test1Pattern" from the web interface using the Snapshot feature:
1. From the left navigation, click
Slot
2
.
2. Close the channels that you want to include in the pattern. For this example, close channels
2001
,
2008
,
2014
,
2021
, and
2028
.
3. Click
Pattern
(above the Channel Action Type box). The Channel Pattern Configuration dialog
box is displayed.
4. Type
Test1Pattern
for the pattern name in the box at the top of the dialog box.
5. Click
Snapshot
. A new pattern is created that contains the closed channels.
3-6
3700AS-900-01 Rev. A / July 2011