Keithley 3700A Series Скачать руководство пользователя страница 27

Страница: 27 / 74

Section 3

Using the web interface

In this section:

Introduction .............................................................................. 3-1

Connect to the instrument web interface.................................. 3-1

Web interface home page ........................................................ 3-2

Card pages............................................................................... 3-3

Scan Builder page.................................................................... 3-8

TSB Embedded...................................................................... 3-11

Introduction

The Series 3700A web interface allows you to review instrument status, control the instrument, and

upgrade the instrument over a LAN connection.
The instrument web page resides in the firmware of the instrument. Changes you make through the

web interface are immediately made in the instrument.
Many examples in this manual and in the Series 3700A Reference Manual can be run through the

TSB Embedded page of the instrument web interface.

Connect to the instrument web interface

NOTE

The instrument web interface requires the web browser plug-in Java

SE Runtime Environment

Version 6 or later.

The instrument web interface uses Java applets and, depending on your browser security settings,

may require your permission to download and install them.

To connect to the instrument web interface, you must have a LAN connection from the computer to

the instrument. See "LAN concepts and settings" in the Series 3700A Reference Manual for more

information about configuring the Series 3700A for a LAN connection, connecting the Series 3700A to

the LAN, and establishing a LAN connection to the instrument.

Once the Series 3700A is configured correctly and connected to the LAN, you can use the Keithley

LXI

Discovery Utility to identify the IP addresses of LXI certified instruments that are set up for

automatic IP address selection. Once identified, you can double-click the IP address in the Utility

to open the web interface for the instrument.

Содержание 3700A Series











































































Результаты поиска

Содержание 3700A Series

Отзывы:

Keithley 3700A Series, Руководство пользователя, Страница: 27 / 74

Результаты поиска

Содержание 3700A Series

Отзывы: