Keithley 3700A Series, Руководство пользователя, Страница: 17 / 74

Section 2: Using the front-panel interface Series 3700A System Switch/Multimeter User's Manual
Key descriptions
Key Description
DISPLAY Toggles between the channel measure display, closed channels list, and the user
message mode
CONFIG Configures a function or operation
RESET Restores factory default LAN settings
OPEN ALL Opens all closed channels
STEP Steps through each step in a predefined scan list
OPEN Opens the selected channel or channel pattern
CLOSE Closes the selected channel or channel pattern
STORE Selects, clears, and saves reading buffer data and creates and deletes reading
buffers
REC Displays stored readings for selected reading buffer
RATE Sets measurement speed (fast, medium, or slow) for the active or selected
function
FUNC Changes to the next function in a factory-defined list of available DMM functions
CHAN If a channel is displayed, opens and closes channels; if a pattern is displayed,
switches to channel view
PATT If a pattern is displayed, manages, opens and closes, and resets patterns; if a
channel is displayed, changes to display a pattern
SLOT Displays information about the installed cards and the instrument, including
firmware revision, model name, and model number
SCAN Allows you to run, manage, view, and reset scan lists
DMM Opens the DMM ACTION menu
LIMIT Puts cursor in the compliance limit field for editing and selects the limit value to
edit
REL Controls relative measurements; allows baseline value to be subtracted from
reading
FILTER Enables or disables the digital filter; you can use this filter to reduce reading noise
LOAD Loads test for execution
RUN Runs the last selected user-defined test code
INSERT Appends the present channels to the scan list
DELETE Deletes channels or channel patterns from the scan list
TRIG Triggers readings
MENU Accesses the main menu, which can be used to configure instrument operation
EXIT (LOCAL) Cancels selection and backs out of the menu structure; also used as a LOCAL
key to take the unit out of remote operation
ENTER Accepts the current selection or brings up the next menu option; pressing this key
is often the same as pressing the navigation wheel
AUTO Enables or disables autorange for the selected function
RANGE (up and
down arrows)
Selects the next higher or lower measurement range on the measurement display
for the selected function.
CURSOR Moves the cursor left or right for editing and scrolls through menu options
2-6 3700AS-900-01 Rev. A / July 2011