![background image](http://html2.mh-extra.com/html/keithley/2657a/2657a_reference-manual_4007750248.webp)
Section 5: Introduction to TSP operation
Model 2657A High Power System SourceMeter® Instrument Reference Manual
5-20
2657A-901-01 Rev. B/December 2012
KIPulse factory script
The KIPulse factory script provides examples of how to generate pulses and to provide a simple
pulsing interface. Pulses can be generated using the functions listed below.
Please note the following information about the KIPulse factory script:
y
This factory script only operates on the channels present in the instrument executing the pulse
functions. These functions will not operate correctly if you attempt to access instrument channels over
the TSP-Link
®
interface.
y
The KIPulse factory scripts are general purpose examples that may not be suitable for all use
cases. Very short pulses (less than 1 ms pulse width) may require optimization of the examples
provided by the factory script in order to achieve settled measurements.
y
The
PulseIMeasureV()
and
PulseVMeasureI()
functions may be accessed from the front
panel. The remaining functions may only be accessed remotely.
Use the configuration
KIPulse tag parameter pulse functions
(on page 5-20) to configure a pulse train
and assign the configuration to the
tag
parameter (use
QueryPulseConfig()
to inspect
configured pulse trains). Use the initiation
InitiatePulseTest()
function to execute the pulse
trains assigned to its
tag
arguments. The conditions listed in the table below must be true for these
functions to execute successfully.
Use the
KIPulse simple pulse functions
(on page 5-20) to specify and perform a specified number of
pulse-measure cycles.
The following functions make up the KIPulse factory script:
KIPulse tag parameter pulse functions
ConfigPulseIMeasureVSweepLin()
(on page 7-35)
ConfigPulseIMeasureVSweepLog()
(on page 7-37)
ConfigPulseVMeasureISweepLin()
(on page 7-41)
ConfigPulseVMeasureISweepLog()
(on page 7-42)
(on page 7-153)
KIPulse simple pulse functions
NOTE
Содержание 2657A
Страница 3: ......