![background image](http://html2.mh-extra.com/html/keithley/2657a/2657a_reference-manual_4007750346.webp)
Model 2657A High Power System SourceMeter® Instrument Reference Manual
Section 7: TSP command reference
2657A-901-01 Rev. B/December 2012
7-33
Example
timestamp = smua.nvbuffer1.timestamps[1]
Get the timestamp of the first reading stored
in dedicated reading buffer 1.
Also see
(on page 7-19)
(on page 7-21)
(on page 7-23)
(on page 7-27)
(on page 7-28)
(on page 7-29)
(on page 7-30)
(on page 3-6)
ConfigPulseIMeasureV()
This KIPulse factory script function configures a current pulse train with a voltage measurement at each point.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function No
Usage
f
,
msg
= ConfigPulseIMeasureV(
smu, bias, level, limit, ton, toff, points, buffer,
tag, sync_in, sync_out, sync_in_timeout, sync_in_abort
)
f
,
msg
= ConfigPulseIMeasureV(
smu, bias, level, limit, ton, toff, points, buffer,
tag, sync_in, sync_out, sync_in_timeout
)
f
,
msg
= ConfigPulseIMeasureV(
smu, bias, level, limit, ton, toff, points, buffer,
tag, sync_in, sync_out
)
f
,
msg
= ConfigPulseIMeasureV(
smu, bias, level, limit, ton, toff, points, buffer,
tag, sync_in
)
f
,
msg
= ConfigPulseIMeasureV(
smu, bias, level, limit, ton, toff, points, buffer,
tag
)
f
A Boolean flag; this flag is
true
when the pulse was successfully configured,
false
when
errors were encountered
msg
A string message; if the
f
flag is
false
,
msg
contains an error message; if it is
true
,
msg
contains a string that indicates successful configuration
smu
System SourceMeter
®
instrument channel (set to
smua
)
bias
Bias level in amperes
level
Pulse level in amperes
limit
Voltage limit (for example, compliance) in volts
ton
Pulse on time in seconds
toff
Pulse off time in seconds
points
Number of pulse-measure cycles
Содержание 2657A
Страница 3: ......