![background image](http://html2.mh-extra.com/html/keithley/2657a/2657a_reference-manual_4007750341.webp)
Section 7: TSP command reference
Model 2657A High Power System SourceMeter® Instrument Reference Manual
7-28
2657A-901-01 Rev. B/December 2012
bufferVar.sourceoutputstates
This attribute indicates the state of the source output for readings that are stored in a specified buffer.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (R)
Yes
Clearing the buffer See
Details
Not
applicable
Usage
state
=
bufferVar
.sourceoutputstates[
N
]
state
The output state (
"Off"
or
"On"
) when reading
N
of the specified buffer was
acquired
bufferVar
The reading buffer; can be a dynamically allocated buffer (user-defined), or a
dedicated reading buffer (such as
smua.nvbuffer1
)
N
The reading number (
1
to
bufferVar
.n
)
Details
The
sourceoutputstates
buffer recall attribute is similar to an array (a Lua table) of strings. This array
indicates the state of the source output (
"Off"
or
"On"
) at the time of the measurement.
For dedicated reading buffers, all buffer attributes are saved to nonvolatile memory only when the reading buffer
is saved to nonvolatile memory.
Example
printbuffer(1, 1, smua.nvbuffer1.sourceoutputstates)
Print the source output for the
first reading stored in dedicated
reading buffer 1.
Example output:
On
Also see
(on page 7-23)
(on page 7-27)
(on page 7-29)
(on page 7-30)
(on page 7-32)
\
bufferVar.sourceranges
This attribute contains the source range that was used for readings stored in a specified reading buffer.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (R)
Yes
Clearing the buffer See
Details
Not
applicable
Содержание 2657A
Страница 3: ......