1-14
Getting Started
Model 2520 User’s Manual
Remote display programming
The display can also be controlled by various SCPI :DISPlay subsystem commands.
summarizes the basic command to enable or disable the display. See
for more information on using this and other display commands.
Front panel display tests
Use the DISPLAY TESTS selection of the main MENU to test various aspects of the front
panel. Test selections include:
•
KEYS
— Front panel keys are tested. Pressing a key displays a message that iden-
tifies that key. Pressing EXIT twice cancels this test.
•
DISPLAY PATTERNS
— Use this selection to turn on all display pixels and
annunciators. Subsequent key presses cycle through tests that turn off annunciators
and corner pixels of each digit, turn on the rows of the top-left display digit, and
turn on all annunciators and pixels of each digit in a sequential manner. Press EXIT
to cancel this test.
•
CHAR SET
— This test displays special characters. Press EXIT to cancel the test.
See
Default settings
By using appropriate menu selections, you can save and recall various instrument setups,
define the power-on configuration, or restore factory defaults as outlined below.
Saving and restoring user setups
You can save and restore up to five of your own user setups using the following proce-
dures.
Saving setups
1.
Select the various instrument operating modes you wish to save.
2.
Press the SETUP key.
3.
From the SAVESETUP MENU, select SAVE, then press ENTER.
4.
Select the setup position (0-4) to save, then press ENTER to complete the process.
Table 1-2
Basic display command
Command
Description
:DISPplay:ENABle <state>
Enable/disable display (state = ON or OFF).
Содержание 2520
