Section 8: Performance verification
Model 2290-10 10 kV Power Supply User's Manual
8-2
2290-10-900-01 Rev. A/December 2013
Recommended test equipment
The next table summarizes the recommended test equipment for the verification procedures.
Table: Recommended verification test equipment
Equipment
Specifications
Manufacturer and model
High-voltage divider
0.01% DC accuracy
Ohm-Labs, Inc. (formerly Julie Research)
KV-10/.01 or KV-10R
Multimeter
0.002% DC accuracy, 10 GΩ DC input impedance Keithley Model 2000
990 Ω load resistor
1%, 1 W
Any appropriate resistor manufacturer
1 MΩ load resistor
10 kV, 25 W
Verification procedures
The verification procedures are explained in detail in the following paragraphs. Refer to the
Recommended test equipment
table and the respective diagrams for test equipment and
connections.
The following procedures use high voltage. Use extreme care to avoid electrical shock that
could result in personal injury or death. Do not touch any exposed circuitry while the high
voltage is enabled.
High voltage cables can store a charge even when disconnected from the unit. Always turn
off the high voltage and make sure all cables and circuitry are completely discharged before
connecting or disconnecting cables or other circuitry.