Model 2231A Triple-channel DC Power Supply Reference Manual Section 5: SCPI command reference
077100401/September 2014
5-7
Unit
V
Returns
None
Examples
APP:VOLT 3,3,1
[SOURce:]APPly:CURRent[:LEVel][:IMMediate][:AMPLitude]
This command is to set current to all channels at the same time.
Item
Description
Group
Source
Syntax
[SOURce:]APPly:CURRent[:LEVel][:IMMediate][:AMPLitude]
[SOURce:]APPly:CURRent[:LEVel][:IMMediate][:AMPLitude]?
Arguments
Arg1: current setting for CH1
Optional Arg2: current setting for CH2
Optional Arg3: current setting for CH3
Unit
A
Returns
None
Examples
APP:CURR 1,1,0.6
CALibration subsystem
The commands in this subsystem configure and control the calibration operations.
CALibration:SECure:[STATe]
This command clears all the specified strings and returns the display back to voltage and current readingS.
Item
Description
Group
Calibration
Syntax
CALibration:SECure:[STATe] {<ON|OFF>,[<password>]}
CALibration:SECure:STATe?
Arguments
0|1|ON|OFF, ‘2231’
Returns
0|1
Examples
CAL:SEC 0, ‘2231’; CAL:SEC OFF
CALibrate:VOLTage:LEVel