manualshive.com logo in svg

Keith CleenSweep Hydraulic - CSH, Руководство пользователя и список запчастей, Страница: 35 / 50

Поделиться
Скачать
Keith CleenSweep Hydraulic - CSH Скачать руководство пользователя страница 35

INSTALLATION / OPERATION & PARTS CATALOG 

CleenSweep

®

 Hydraulic - CSH

        

 

 

 

 

29 

DOC03668  Rev. G

3.14  Winch Brake Adjustment - Wedge Brake

The winch brake retains the tarp in the retracted position at the top of the front wall during loading, 
transport, and the beginning of the unloading cycle. The brake can be adjusted from the top or the 
bottom using either pair of jam nuts, whichever side is easiest to access.

1.  Retract the tarp completely to the top of the front wall.

2.  Turn whichever pair of jam nuts is easiest to reach, to turn the threaded rod to adjust the brake.  A 

deep socket on a ratchet works well to do this. While turning the jam nut pair, to turn the threaded 

rod, it can help to put a finger on the wedge brake piece to make sure that the brake is traveling in 

the direction that you want it to if you can’t easily see it. Turn the threaded rod to tighten the brake 
against the strap until it takes about 10 lbs [5 kg] of force to move the tarp (it should be possible, 

but take some effort to pull the tarp down by hand).

 

Nylock Jam Nut

Hex Jam Nut

Brake Mount

(through hole)

Brake

Brake Mount

(through hole)

Hex Jam Nut

(Brake Side)

Nylock Jam Nut

(Brake Side)

Содержание CleenSweep Hydraulic - CSH



















































Отзывы:

Нет отзывов