Drive Housing Re placement
CAUTION
Do not drop gear cluster when removing
drive housing (3). Gear cluster may stay
engaged in motor front end bell or drive
housing.
Installation
Disassembly
Make sure gear (3) and thrust washers (15,16,17,
18) are in place (16/17 are copper thrust washers)
Brush grease onto gear teeth.
1.Push drive housing(3) into gear box(20), and fix it
with five screws (13). Torque to 21
–
23 N·m.
2.Install connecting rod(4) and bearing housing
(19) to drive housing(3).
3.Install four screws(14).Torque to 21
–
23 N·m.
4.Install pump (41);
Displacement Pump
Replacement
,page 14.
5.Install pump rod cover (9) with screw (8).
6.Install front cover(12) with screw(11).
Relieve pressure, page 5.
1.Remove screw (11)and front cover (12).
2.Remove screw (8)and pump rod cover (9).
3.Remove pump (7);
Displacement Pump
Replacement
, page 17
4.Remove four screw (14),connecting
rod (4)and bearing housing (19).
5.Remove screw (13) and pull drive housing
(3)off case(20).
12
13
