![background image](http://html1.mh-extra.com/html/keiser/kms800/kms800_operating-manual_661532003.webp)
2
3
To be able to use the machine safely it is essential that you read the operating instructions
and the safety instructions thoroughly and comply with all of them. The machine is to be
used only by persons who have read the operating instructions and who are acquainted
with the occupational safety and accident prevention regulations in force in your country.
In addition, you must also comply with the general safety instructions also included with
the machine.
rating plate.
Do not use the device in any environment with potentially explosive atmosphere. Do not
below 21° C.
Take care to ensure that no liquid splashes against the motor housing and keep it away
from the rain – risk of electric shock!
Never clean the machine with water – risk of electric shock!
Do not wind cables or leads around any parts of your body.
Do not use the machine with a damaged cable. Do not touch the cable and pull out the
power plug immediately. There is an increased risk of electric shock from damaged cables.
If the mains power cable has to be replaced (because of damage or similar), ensure that it is
replaced by an authorized representative of the manufacturer (electrician) in order to avoid
any risk to safety.
sure you have a secure footing.
Before starting up, check that the mixing rod is securely attached and rotates without a hitch.
Start up and run down the machine in the mixing container only. Ensure that the mixing
Do not reach into the mixing container with your hands or insert any other objects into it
while mixing is in progress. Risk of crushing!
Wait until the machine or tool comes to a complete standstill. Rotating tools can snag and
cause injuries or damage.
Use ear protection!
We recommend that you wear work gloves and protective goggles when using the mixer.
To protect yourself from harmful dust while mixing, wear a dust mask. Use a dust extractor
wherever possible.
Always connect machines via a residual current device (RCD) with a rated residual current
of 30 mA or less
Read and observe the operating instructions for the
machine before you start it up!
Always wear protective goggles and ear protection
while working.
It is advisable to wear a dust mask whenever working
with materials which generate large amounts of dust.
Always wear protective gloves while working.
Safety Precautions
Содержание KMS800
Страница 1: ...Operating Manual GB ...