Keimling Soyabella SB-130, Руководство по эксплуатации

Страница: 37 / 64

37
Soyabella™ SB-130
Troubleshooting
Problem Probable Cause Solution
Screen slips off head unit Improperly fi tted over threads
Re-secure screen by twisting it into the
proper lock direction.
Ingredients not
fully ground
Too much or too little in screen Refi ll screen to recommended amount.
Not enough water in the chamber
Fill chamber to a level between
the two inscribed marks.
Basket screen clogged Clean with the cleaning brush.
Overfl ow
Too much water in the chamber
Adjust water level to within the two
inscribed marks.
Screen is clogged
Clean with the cleaning brush and hot,
soapy water.
Alarm doesn’t sound
Water level too low
Fill chamber to a level within the two
inscribed marks.
Water temperature too cold
Warm water to 10° C - 40° C
(50° F - 104° F).
Blade shaft or overfl ow sensor is dirty Clean thoroughly.
Milk scorches
Not enough ingredients in screen
Try again – use the measuring
cup when fi lling the screen.
Too much ingredients, too little water
Try again – fi ll water in between
recommended fi ll lines. Use the measuring
cup when fi lling the screen.
Milk too thin
Screen clogged
Clean with the cleaning brush
and hot, soapy water.
Not enough ingredients
Try again – use the measuring
cup when fi lling the screen.
Ingredients not soaked
long enough Refer to suggestions in
operating instructions.
Heating, but motor
not operating
Check for clogs and operating errors
Power off and restart. Refer to
manual for operating instructions.
Doesn’t activate when
buttons are pushed Water entered inside
of head unit Wait 4-5 days for head unit to dry.
Then try again.