KegLand KL10955, Инструкция по эксплуатации

Страница: 2 / 7

Soda Carbonator – Keg Reactor Lid Instruction Manual
Page 2 of 7
www.KegLand.com.au Last Updated 25/10/2022 11:31 AM
Contents
Warnings ............................................................................................................................................... 2
No Pre-chill Initial Setup (Consumption of less than 10L per day) ....................................................... 3
Pre-chill Plumbing Options (Consumption of more than 10L per day) ................................................ 5
Pre-chill water with an inline keg ...................................................................................................... 5
Pre-chill water with a glycol chiller ................................................................................................... 6
Low Throughput (<10L per Day) – G40 Single Pass ........................................................................ 6
High Throughput (>10L per Day) – G40 Double Pass ..................................................................... 7
Expected time to carbonate after initial setup ..................................................................................... 7
Plumbing options without access to a mains water supply .................................................................. 7
Warnings
1. All plumbing which involves connection to a mains water supply must be
undertaken by a licenced plumber.
2. Only use approved PE Water line for unregulated mains water and 4mm ID x 8mm
OD EVA Barrier hosing or PE Water line for all other hosing in your system.
3. Install check valves between the regulator and the keg and between the inline
regulator and the soda carbonator.
4. Ensure all hosing is cut with a clean and straight cut and that the hosing is pushed
to its full depth into any push in fittings. Failure to do so may result in the hose
coming loose or leaking.