BrewZilla 100L - Gen 4 Instruction Manual
Page
20
of
48
www.KegLand.com.au
Last Updated 09/02/2024 12:20 PM
To adjust the duty cycle of the pump, press the
Return
button until the pump percentage is
highlighted then use the up or down arrows to change the pump percentage. If the pump
percentage is reduced then the pump will cycle on/off to reduce the output.
Alternatively, you can hold the pump button while pressing the up or down arrows to adjust
the duty cycle.
Important: to minimise the risk of blocking the pump, always have the top screen in place
when recirculating wort during the mash
Adjusting the heating power
Press the
Return
button until the Heat percentage is highlighted then use the up or down
arrows to change the heating power.
If you have PID disabled then it is best to set the heating power to between 30-40% during the
mash to stop the temperature overshooting your set temperature.
