Kegel IKON Lane Machine, Руководство по эксплуатации

Страница: 34 / 167

21
The size of the stream can be set to an exact amount, or volume. We achieve
this exact stream and volume by using a ‘highly’ accurate fluid metering pump.
This pump, running at a constant speed, gives absolute positive displacement
of the conditioner. The accuracy of the pump is
 1% with a continued
precision of  0.5% after millions of cycles. To further express how accurate the
pump is, these are the same pumps used in hospital medication dispensers.
The oil head traveling at a constant speed puts down the same amount of oil as it
travels across each board. The pump allows us to set the exact amount of conditioner
that goes on each and every board within the stream. We measure this amount and
refer to it as the ‘
Volume per Board ’ .
The pump output is measured in
microliters . This is a metric measurement for
fluid volume. The factory setting for the pump is 50 microliters per board.
To give you a visual perspective of how much conditioner is being applied in 50
microliters, consider that about 20 microliters make up one drop of oil. So each
time a stream of oil crosses one board it applies almost 2-1/2 drops of
conditioner.
Since this amount of conditioner is too small to measure with the naked eye, we
must use a larger number of boards to get an amount we can visibly measure.
Factory-set
PATTERN #16 is designed to condition 400 boards. This will give us
enough conditioner to determine the amount that is being applied per board.
Using a large round number makes the math a little easier to figure.
Program Volume Test
Turn the machine ON and from the HOME screen
press MAIN MENU
and the screen will change to the
one shown on the right allowing the operator to
choose a function . By pressing the CLEANER OIL
CALIB the screen will change to the screen on the
following page.