INSTALLATION
Speedster
page 7
Figure 2. Water softener on right is connected to the pump on the left. Water flow is
according to arrows. Both handles on water softener are in “9 ‘o clock” position. Washing
machine tap is right of figure, Speedster will be to left of figure.
4.
Attach the short high pressure hose to the lower tap on the water softener.
Tighten with a 20 mm spanner while securing the tap with a 19 mm spanner.
5.
Attach the other end of the short high pressure hose to the inlet of the pump.
Beware!
The inlet of the pump is marked with an arrow pointing down, towards
the pump-housing (see figure 3). Tighten with 20 mm spanner.
6.
Attach the second long high pressure hose to the outlet of the pump.
Beware!
The outlet of the pump is marked with an arrow pointing upwards, away
from the pump-housing (see figure 3). Tighten with a 20 mm spanner.
Figure 3. Pump with inlet and outlet shown.
7.
Make sure that both handles of the taps on the water softener are in a horizontal
“9 ‘o clock” position as shown in figure 2. Place the loose end of the high pressure
hose in the bucket and open the washing machine tap such that water runs
through the water softener into the bucket. The water can be brownish-yellow at
Water softener
pump
inlet
outlet
inlet
outlet
