8
Operating Steps (to Use the Robot)
When starting to use the robot, the user should operate in the following steps
carefully.
Installation
1. Robot Mapping
Before the robot moves automatically, it needs to get familiar with the
environment around, and stores and identifies the operating environment by
way of a map. This step is called mapping. (It is completed by professional
technicians in advance and users do not need to operate by themselves.)
When there exist significant changes in the indoor environment of the robot
(such as redecoration is launched, the robot is moved to a new place of
operation or indoor items are rearranged, etc.), the user should contact
customer service personnel at 400-9651-808 to rebuild the map.
Startup
1. Switch on/off
The power switch is set on the chassis behind the robot. When the silicone
cover under the chassis is opened, the user can see button on the right, which
is the power switch. Find the position of the power switch in the position
exhibited in Figure 2, and press the power switch by hand to start the robot.
The system cannot be put into normal operation until it starts for about 40
