Evolution3 SmartFold User Guide
The world’s finest cutting machines
www.keencut.com
+44 (0) 1536 263158
+1 (716) 748 6203
[email protected] (UK HQ)
[email protected] (US sales)
Scan the QR code or
click here to view this document online >
Page 41 of 48
7.4 Cut ACP with the Rocker tool head
Aluminium Composite Panels can be cut using the Rocker tool head. The following method is only intended for occasional
use, for cutting on a regular basis the SteelTrak should be considered.
Use the Tech D012 blade and set the depth so the tip passes
through the ACP by 1-2mm (
1
⁄
16
”).
Use the push technique to cut though the ACP, it usually takes
5-6 passes of the blade to cut all the way through and will
require an amount of effort.
The finish should be clean but the edges may be sharp and
require finishing with a file.
Alternatively, some ACP’s will snap once the top foil has been cut, bend back and forth a few times to break the bottom foil
then clean the edges with a file.
