Evolution3 SmartFold User Guide
The world’s finest cutting machines
www.keencut.com
+44 (0) 1536 263158
+1 (716) 748 6203
[email protected] (UK HQ)
[email protected] (US sales)
Scan the QR code or
click here to view this document online >
Page 23 of 48
4.3 Advanced cutting techniques
NOTE: The following is for a right-handed person. For left-handed use cut at the left-hand end of the cutter and reverse the
direction of cut and hand positions.
When cutting thick, tough materials such as PVC foam board and
fluted plastics such as Correx or Coroplast, set the blade depth
so the blade tip protrudes only 1-2mm (
1
⁄
16
”) through the
thickness of the board and cuts from left to right.
Position the board against the right hand material stop
and clamp in place.
Position the cutting head to start the cut, turn your body to face
to the right and place the palm of your right hand on the cutting
head.
